نگهداری و مراقبت از دستگاه برش سنگ

دقت, سرعت برش و صافی دستگاه برش سنگ کیفیت محصول را تعیین می کند. Daily maintenance and care of the machine can not only increase the life of the machine, but also improve the quality of the product, bringing considerable economic benefits to the enterprise.

Maintenance of the machine can be divided into

Daily maintenance and care of stone cutting machine:

1. Clean the sediment of the whole machine and the sink every day.

2. Pay attention to whether there is lubricating oil on the surface of the horizontal and vertical guide rails and rack teeth of the machine to ensure good lubrication at all times.

Weekly maintenance and care of stone cutting machine:

1. Clean the machine thoroughly every week, clean the transmission gear rack, and add and change oil strictly according to lubrication requirements.

2. Check whether the horizontal and vertical guide rail sliders are working properly. If there is any abnormality, they should be replaced in time.

3. Detect the sensitivity of travel switches, limit switches, etc., and replace them in time if abnormalities are found.

Monthly maintenance of stone cutting machine:

1. Check the cutting saw blade: Determine whether to replace the new saw blade according to the degree of wear.

2. Check whether the joints and pipes are damaged

3. Check whether the fastening parts are loose. If they are loose, tighten them in time.

4. Check whether the electrical components and wiring screws in the vehicle control box are loose, and whether the control action of the electrical components is sensitive.

5. Check whether the clearance of each moving guide rail is within the allowable range.

6. Check the effectiveness of each button and selector switch.